3 interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? mini d ribbon (mdr) connectors .050 boardmount through-hole vertical receptacle - shielded 102 series physical electrical environmental insulation material: glass filled polyester (pbt) or glass filled polyester (pct) - (high temp. option) - see ordering information flammability: ul 94v-0 color: black (pbt) or beige (pct)-high temp. option - see ordering information contact material : copper alloy plating underplating: 100 ? [ 2.5 m ] nickel wiping area: 30 ? [ 0.76 m ] min. gold solder tails: see ordering information body material: zinc alloy plating: nickel shroud & latch hook material: steel plating: nickel marking: 3m logo and part number current rating: 1 a insulation resistance: > 5 10 8 at 500 v dc withstanding voltage: 500 v rms for 1 minute temperature rating: -20 c to +85 c pbt insulation process rating: solder dip test - 260c for 10 secs., two times after 100c max. preheat, 60 sec. max. duration. pct insulation process rating high temp. option: 260c (profile per j-std-020c) ? wiper-on-wiper contact for reliable repetitive plugging ? rugged die cast metal case construction ? screw lockdown for reliable pcb retention ? interface latch design for connection stability ? ieee 1284c interface as a 36 contact connector ? contacts: 14, 20, 26, 36, 40, 50, 68, 80 and 100 ? see regulatory informa tion appendix (ria) for chemical compliance information. ts-0427-18 sheet 1 of 3 date modified: march 5, 2007 ul file no.: e68080
3 interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 (2x) lockstand thread see ordering information below 3m ? mini d ribbon (mdr) connectors .050 boardmount through-hole vertical receptacle - shielded 102 series contact quantity dim ensions abcde 14 0.300 [ 7.62 ] 0.93 [ 23.6 ] 1.16 [ 29.5 ] 0.50 [ 12.6 ] .77 [ 19.5 ] 20 0.450 [ 11.43 ] 1.08 [ 27.5 ] 1.31 [ 33.4 ] .65 [ 16.4 ] .92 [ 23.4 ] 26 .600 [ 15.24 ] 1.23 [ 31.3 ] 1.46 [ 37.2 ] .80 [ 20.2 ] 1.07 [ 27.2 ] 36 .850 [ 21.59 ] 1.48 [ 37.6 ] 1.71 [ 43.5 ] 1.05 [ 26.6 ] 1.32 [ 33.5 ] 40 .950 [ 24.13 ] 1.58 [ 40.2 ] 1.81 [ 46.1 ] 1.15 [ 29.1 ] 1.42 [ 36.1 ] 50 1.200 [ 30.48 ] 1.83 [ 46.5 ] 2.06 [ 52.4 ] 1.40 [ 35.5 ] 1.67 [ 42.4 ] 68 1.650 [ 41.91 ] 2.28 [ 57.9 ] 2.51 [ 63.8 ] 1.85 [ 46.9 ] 2.12 [ 53.8 ] 80 1.950 [ 49.53 ] 2.58 [ 65.6 ] 2.81 [ 71.5 ] 2.15 [ 54.5 ] 2.42 [ 61.5 ] 100 2.450 [ 62.23 ] 3.08 [ 78.3 ] 3.31 [ 84.2 ] 2.65 [ 67.2 ] 2.92 [ 74.2 ] ordering information ts-0427-18 sheet 2 of 3 15 .075 [ 1.905 ] .075 [ 1.905 ] .075 [ 1.905 ] .0157 sq [ 0.399 ] .134 [ 3.4 ] .19 [ 4.8 ] .28 [ 7.2 ] .05 [ 1.3 ] position 1 position 2 .05 [ 1.3 ] e d .050 [ 1.27 ] a c b .23 [ 5.8 ] .21 [ 5.2 ] .18 [ 4.6 ] last position .050 [ 1.27 ] .25 [ 6.3 ] .36 [ 9.1 ] position .0 .00 .000 inch .1 .01 .005 [ ] dimensions for reference onl y tolerance unless noted [m m ] inch x 102 xx - 62 x 2 x c blank = stand., pbt insulator n = high temp. option, pct insulator contact quantity (see table) a0 = 100 pos. solder tail plating: v = tin-lead over nickel (ria e3 & c2 apply) p = gold flash over nickel (ria e1 & c1 apply) lockstand thread 0 = m 2.6 (special) 1 = m 2.5 (standard)
3 interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? mini d ribbon (mdr) connectors .050 boardmount through-hole vertical receptacle - shielded 102 series recommended board layout viewed from connector side 20, 36, 40, 68, 80 and 100 pos only c .004 d .004 note: panel thickness .079 [ 2.00 ] max. r .060 [ 1.52 ] .319 .004 [ 8.10 ] recommended panel cut-out a a 2x 0.20 [ 5.00 ] ? .028 .003 [ 0.70 ] b .004 ? .028 .003 [ 0.70 ] .050 typ [ 1.27 ] 2x 0.20 [ 5.0 ] 2x 0.16 [ 4.0 ] last position 2x ? .110 .003 [ 2.8 ] (see note) position 3 position 1 position 2 .112 [ 2.86 ] 2x 0.20 [ 5.0 ] 2x 0.20 [ 5.0 ] last position .050 typ [ 1.27 ] 2x 0.20 [ 5.0 ] 2x 0.16 [ 4.0 ] .075 typ [ 1.90 ] position 3 position 2 .112 [ 2.86 ] .075 typ [ 1.90 ] .2x 0.20 [ 5.0 ] note: plated through holes for .062 board thickness. (see note) 14, 26, 50 pos only 2x ? .110 .003 [ 2.8 ] (see note) (see note) b .004 position 1 position position ts-0427-18 sheet 3 of 3 ab 20 .450 [ 11.43 ] 1.081 [ 27.45 ] 36 .850 [ 21.59 ] 1.481 [ 37.61 ] 40 .950 [ 24.13 ] 1.581 [ 40.15 ] 68 1.650 [ 41.91 ] 2.281 [ 57.93 ] 80 1.950 [ 49.53 ] 2.581 [ 65.55 ] 100 2.450 [ 62.23 ] 3.081 [ 78.25 ] dimensions contact q uantity ab 14 .300 [ 7.62 ] 0.931[ 23.64 ] 26 .600 [ 15.24 ] 1.231 [ 31.26 ] 50 1.200 [ 30.48 ] 1.831 [ 46.50 ] dimensions contact q uantity cd 14 .78 [ 20.0 ] .93 [ 23.64 ] 20 .94 [ 23.8 ] 1.08 [ 27.45 ] 26 1.09 [ 27.6 ] 1.23 [ 31.26 ] 36 1.33 [ 33.9 ] 1.48 [ 37.61 ] 40 1.44 [ 36.5 ] 1.58 [ 40.15 ] 50 1.69 [ 42.8 ] 1.83 [ 46.50 ] 68 2.13 [ 54.2 ] 2.28 [ 57.93 ] 80 2.44 [ 61.9 ] 2.58 [ 65.55 ] 100 2.94 [ 74.6 ] 3.08 [ 78.25 ] contact quantity dimensions
regulatory information appendix 3m electronic solutions division/interconnect europe appendix e1: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment, as amended by eu commission decision 2005/618/ec. this product is rohs compliant 2005/95/ec. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix e2: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment, as amended by eu commission decision 2005/618/ec this product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under eu commission decision 2005/747/ec. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix e3: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment as amended by commission decision 2005/618/ec. this product contains lead in the solder tail area in excess of the maximum concentration value allowed. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix e4: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment, as amended by eu commission decision 2005/618/ec. this product contains decabde in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under eu commission decision 2005/17/ec. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. ria-2217-b
china appendix c1: china rohs electronic industry standard of the peoples republic of china, sj/t11363-2006, requirements for concentration limits for certain hazardous substances in electronic information products. this symbol, per marking for the control of pollution caused by electronic information products, sj/t11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix c2: china rohs 2 0 electronic industry standard of the peoples republic of china, sj/t11363-2006, requirements for concentration limits for certain hazardous substances in electronic information products. this symbol, per marking for the control of pollution caused by electronic information products, sj/t11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. the numerical reference in the symbol above should not be construed as a representation regarding the products life or an extension of a product warranty. the product warranty is stated below. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the product warranty stated below. important notice all statements, technical information, and recommendations related to 3ms products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. before using this product, you must evaluate it and determine if it is suitable for your intended application. you assume all risks and liability associated with such use. any statements related to the product which are not contained in 3ms current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3m. warranty; limited remedy; limited liability. this product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3m makes no other warranties including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose. if this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3ms option, to replace or repair the 3m product or refund the purchase price of the 3m product. except where prohibited by law, 3m will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3m product, regardless of the legal theory asserted. 3 electronic solutions division 6801 river place blvd. austin, tx 78726-9000 800/225-5373 www.3m.com/interconnects ria-2217-b ? 3m 2007 name and content of hazardous substances or elements
|
